logo
良い値段  オンライン

商品の詳細

ホーム > 製品 >
マイクロウェーブ モーションセンサー
>
Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable

ブランド名: JUTAI
モデル番号: RD24-4
MOQ: 100
価格: 4-6 USD according to order quantity
パッケージの詳細: カートン
支払条件: T/T、ペイパル、アリペイ、ウェスタンユニオン
詳細情報
起源の場所:
中国深セン
証明:
CE
テクノロジー:
マイクロ波ドップラーレーダー
送信機周波数:
24.125GHz
送信機の放射電力:
<20 dBm EIRP
送信電力密度:
≤5mW/cm
最大取り付け高さ:
3m
傾斜角:
垂直0°〜90°。横方向 -30°~+30°
検出フィールド(2.2m取り付け):
4m(幅)×2m(奥行き)
検出モード:
動き検出
最低検出速度:
5cm/s(センサー軸)
供給電圧:
12-24V AC ±10%; DC12-24V +30% / -10%
本管の頻度:
50-60Hz
消費電力:
≤2W(VA)
出力モード:
スイッチチューブ出力
信号出力時間:
1.5秒ホールド
最大接点電圧:
42V AC/DC
最大接点電流:
1A(抵抗性)
最高の転換力:
30W(DC) / 60VA(AC)
使用温度範囲:
-20℃〜 +55℃
保護の程度:
IP54
規格適合:
R&TTE 1999/5/EC; EMC 89/336/EEC
材料:
ABS
ハウジングの色:
ブラック/シルバー
次元(W×H×D):
120mm×80mm×50mm
正味重量:
0.215kg
ケーブル長:
2.2m
供給の能力:
5000個/月
ハイライト:

Doppler detector with stable signal

,

Microwave motion sensor wide range

,

Durable RD24-4S motion detector

製品の説明

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable

The Doppler Detector RD24-4S is a high-reliability motion sensing solution engineered for commercial and industrial door automation systems, boasting stable signal output, an expansive wide detection range, and rugged durable construction for consistent performance in high-traffic entryways. Built on professional 24.125GHz microwave Doppler technology, this detector delivers rock-solid signal output with zero drift or interruption, even in complex electromagnetic environments near neon lamps or electronic equipment, ensuring accurate, non-stop trigger signals for automatic, glass and sliding doors—eliminating signal failure that causes door malfunctions. Its optimized wide detection range, reaching 4m(W)×2m(D) at the standard 2.2m mounting height, covers full entry areas of most commercial door setups, capturing human motion from all typical approach angles with no blind spots, and flexible tilt angle adjustment lets you fine-tune coverage to match narrow passageways or wide commercial bays effortlessly.
 
Crafted for long-lasting use in busy real-world settings, the RD24-4S features a rugged ABS housing with IP54 dustproof and waterproof protection, resisting daily splashes, dust accumulation and minor physical impact, while its wide temperature tolerance of -20℃ to +55℃ ensures stable operation in cold winter and hot summer conditions without performance degradation. The durable build is paired with energy-efficient performance (≤2W power consumption) and 12-24V AC/DC wide voltage compatibility, integrating seamlessly into existing door control systems with low operational costs. A built-in LED status indicator and gentle-adjust sensitivity potentiometer simplify installation and maintenance, and compliance with R&TTE 1999/5/EC and EMC 89/336/EEC international standards guarantees safe, interference-free operation. Combining unwavering signal stability, broad coverage and hard-wearing design, this Doppler Detector RD24-4S is the durable, low-maintenance motion sensing choice for commercial door automation.

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 0 

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 1Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 2
Product Highlights
  • 24.125GHz mainstream microwave frequency for stable motion detection (≥5cm/s)
  • Wide detection field: 4m(W)*2m(D) at 2.2m mounting height
  • Flexible angle adjustment: 0°~90° vertical / -30°~+30° lateral tilt
  • Wide voltage supply: 12-24V AC/DC with low power consumption (≤2W)
  • IP54 protection & -20℃~+55℃ working temperature for indoor/outdoor semi-enclosed use
  • Easy installation & adjustment with compact size, sensitivity potentiometer, and clear LED status prompt
  • Reliable output: 1.5s signal hold, 42V AC/DC max contact voltage, 1A resistive current
Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 3
Technical Specifications
Parameter Specification
Technology Microwave Doppler Radar
Transmitter Frequency 24.125GHz
Transmitter Radiated Power <20 dBm EIRP
Transmitter Power Density ≤5mW/cm
Maximum Mounting Height 3m
Tilt Angles 0°~90° vertical; -30°~+30° lateral
Detection Field (2.2m mounting) 4m(W)*2m(D)
Detection Mode Motion detection
Minimum Detectable Speed 5cm/s (sensor axis)
Supply Voltage 12-24V AC ±10%; 12-24V DC +30% / -10%
Mains Frequency 50-60Hz
Power Consumption ≤2W(VA)
Output Mode Switch tube output
Signal Output Time 1.5s hold
Max Contact Voltage 42V AC/DC
Max Contact Current 1A (resistive)
Max Switching Power 30W(DC) / 60VA(AC)
Working Temperature Range -20℃ ~ +55℃
Degree of Protection IP54
Norm Conformity R&TTE 1999/5/EC; EMC 89/336/EEC
Material ABS
Housing Color Black/Silver
Dimensions (W*H*D) 120mm*80mm*50mm
Net Weight 0.215kg
Cable Length 2.2m
Installation & Adjustment Guide
The sensor's performance is closely related to correct installation and adjustment. Simple operation with no professional tools required:
Mounting Requirements
Avoid vibration positions, neon lamp proximity and sensor occlusion; do not touch internal electronic parts during installation.
Sensitivity Adjustment
Rotate the sensitivity potentiometer gently and slowly; the sensitivity value determines the size of the detection field (adjust to 1/2 or higher for short detection distance).
Angle Adjustment
Planar antenna lateral angle = detection field position; vertical angle = detection field depth; set microwave module angle to ≥45° for optimal detection.
Status Check
LED flashes after power-on (normal standby); LED lights up continuously when a moving target is detected (detection trigger).
Troubleshooting Guide
Fault Phenomenon Probable Causes Corrective Action
Door does not open & LED no light Sensor power off Check wiring connection and power supply validity
Door opens/closes constantly Sensor detects door vibration/movement; interference source in detection range Fix the sensor firmly; increase tilt angle/reduce sensitivity; remove interference sources in the detection field
Detection distance is too close Low sensitivity; microwave module angle <45°; sensor blocked Adjust sensitivity potentiometer to 1/2 or higher; set module angle to ≥45°; remove occluding objects
Application Scenarios
The RD24-4S is a multi-scenario motion detection sensor with high adaptability, primarily applicable to:
  • Automatic Door Systems: Sliding doors, swing doors, glass induction doors (commercial buildings, shopping malls, office buildings)
  • Security & Monitoring: Perimeter security detection, indoor human motion induction (residential, factory, warehouse)
  • Industrial Automation: Conveyor belt motion detection, equipment start/stop induction (light industry production lines)
  • Intelligent Building: Smart lighting induction, air conditioning induction (public areas such as corridors and elevators)
Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 4 Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 5
Core Technologies
Microwave Doppler Radar Sensor 24.125GHz Radar Sensor Automatic Door Motion Detector Wide Field Detection Sensor IP54 Motion Sensor
良い値段  オンライン

商品の詳細

ホーム > 製品 >
マイクロウェーブ モーションセンサー
>
Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable

ブランド名: JUTAI
モデル番号: RD24-4
MOQ: 100
価格: 4-6 USD according to order quantity
パッケージの詳細: カートン
支払条件: T/T、ペイパル、アリペイ、ウェスタンユニオン
詳細情報
起源の場所:
中国深セン
ブランド名:
JUTAI
証明:
CE
モデル番号:
RD24-4
テクノロジー:
マイクロ波ドップラーレーダー
送信機周波数:
24.125GHz
送信機の放射電力:
<20 dBm EIRP
送信電力密度:
≤5mW/cm
最大取り付け高さ:
3m
傾斜角:
垂直0°〜90°。横方向 -30°~+30°
検出フィールド(2.2m取り付け):
4m(幅)×2m(奥行き)
検出モード:
動き検出
最低検出速度:
5cm/s(センサー軸)
供給電圧:
12-24V AC ±10%; DC12-24V +30% / -10%
本管の頻度:
50-60Hz
消費電力:
≤2W(VA)
出力モード:
スイッチチューブ出力
信号出力時間:
1.5秒ホールド
最大接点電圧:
42V AC/DC
最大接点電流:
1A(抵抗性)
最高の転換力:
30W(DC) / 60VA(AC)
使用温度範囲:
-20℃〜 +55℃
保護の程度:
IP54
規格適合:
R&TTE 1999/5/EC; EMC 89/336/EEC
材料:
ABS
ハウジングの色:
ブラック/シルバー
次元(W×H×D):
120mm×80mm×50mm
正味重量:
0.215kg
ケーブル長:
2.2m
最小注文数量:
100
価格:
4-6 USD according to order quantity
パッケージの詳細:
カートン
受渡し時間:
5-8 ワーキングダグ
支払条件:
T/T、ペイパル、アリペイ、ウェスタンユニオン
供給の能力:
5000個/月
ハイライト:

Doppler detector with stable signal

,

Microwave motion sensor wide range

,

Durable RD24-4S motion detector

製品の説明

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable

The Doppler Detector RD24-4S is a high-reliability motion sensing solution engineered for commercial and industrial door automation systems, boasting stable signal output, an expansive wide detection range, and rugged durable construction for consistent performance in high-traffic entryways. Built on professional 24.125GHz microwave Doppler technology, this detector delivers rock-solid signal output with zero drift or interruption, even in complex electromagnetic environments near neon lamps or electronic equipment, ensuring accurate, non-stop trigger signals for automatic, glass and sliding doors—eliminating signal failure that causes door malfunctions. Its optimized wide detection range, reaching 4m(W)×2m(D) at the standard 2.2m mounting height, covers full entry areas of most commercial door setups, capturing human motion from all typical approach angles with no blind spots, and flexible tilt angle adjustment lets you fine-tune coverage to match narrow passageways or wide commercial bays effortlessly.
 
Crafted for long-lasting use in busy real-world settings, the RD24-4S features a rugged ABS housing with IP54 dustproof and waterproof protection, resisting daily splashes, dust accumulation and minor physical impact, while its wide temperature tolerance of -20℃ to +55℃ ensures stable operation in cold winter and hot summer conditions without performance degradation. The durable build is paired with energy-efficient performance (≤2W power consumption) and 12-24V AC/DC wide voltage compatibility, integrating seamlessly into existing door control systems with low operational costs. A built-in LED status indicator and gentle-adjust sensitivity potentiometer simplify installation and maintenance, and compliance with R&TTE 1999/5/EC and EMC 89/336/EEC international standards guarantees safe, interference-free operation. Combining unwavering signal stability, broad coverage and hard-wearing design, this Doppler Detector RD24-4S is the durable, low-maintenance motion sensing choice for commercial door automation.

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 0 

Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 1Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 2
Product Highlights
  • 24.125GHz mainstream microwave frequency for stable motion detection (≥5cm/s)
  • Wide detection field: 4m(W)*2m(D) at 2.2m mounting height
  • Flexible angle adjustment: 0°~90° vertical / -30°~+30° lateral tilt
  • Wide voltage supply: 12-24V AC/DC with low power consumption (≤2W)
  • IP54 protection & -20℃~+55℃ working temperature for indoor/outdoor semi-enclosed use
  • Easy installation & adjustment with compact size, sensitivity potentiometer, and clear LED status prompt
  • Reliable output: 1.5s signal hold, 42V AC/DC max contact voltage, 1A resistive current
Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 3
Technical Specifications
Parameter Specification
Technology Microwave Doppler Radar
Transmitter Frequency 24.125GHz
Transmitter Radiated Power <20 dBm EIRP
Transmitter Power Density ≤5mW/cm
Maximum Mounting Height 3m
Tilt Angles 0°~90° vertical; -30°~+30° lateral
Detection Field (2.2m mounting) 4m(W)*2m(D)
Detection Mode Motion detection
Minimum Detectable Speed 5cm/s (sensor axis)
Supply Voltage 12-24V AC ±10%; 12-24V DC +30% / -10%
Mains Frequency 50-60Hz
Power Consumption ≤2W(VA)
Output Mode Switch tube output
Signal Output Time 1.5s hold
Max Contact Voltage 42V AC/DC
Max Contact Current 1A (resistive)
Max Switching Power 30W(DC) / 60VA(AC)
Working Temperature Range -20℃ ~ +55℃
Degree of Protection IP54
Norm Conformity R&TTE 1999/5/EC; EMC 89/336/EEC
Material ABS
Housing Color Black/Silver
Dimensions (W*H*D) 120mm*80mm*50mm
Net Weight 0.215kg
Cable Length 2.2m
Installation & Adjustment Guide
The sensor's performance is closely related to correct installation and adjustment. Simple operation with no professional tools required:
Mounting Requirements
Avoid vibration positions, neon lamp proximity and sensor occlusion; do not touch internal electronic parts during installation.
Sensitivity Adjustment
Rotate the sensitivity potentiometer gently and slowly; the sensitivity value determines the size of the detection field (adjust to 1/2 or higher for short detection distance).
Angle Adjustment
Planar antenna lateral angle = detection field position; vertical angle = detection field depth; set microwave module angle to ≥45° for optimal detection.
Status Check
LED flashes after power-on (normal standby); LED lights up continuously when a moving target is detected (detection trigger).
Troubleshooting Guide
Fault Phenomenon Probable Causes Corrective Action
Door does not open & LED no light Sensor power off Check wiring connection and power supply validity
Door opens/closes constantly Sensor detects door vibration/movement; interference source in detection range Fix the sensor firmly; increase tilt angle/reduce sensitivity; remove interference sources in the detection field
Detection distance is too close Low sensitivity; microwave module angle <45°; sensor blocked Adjust sensitivity potentiometer to 1/2 or higher; set module angle to ≥45°; remove occluding objects
Application Scenarios
The RD24-4S is a multi-scenario motion detection sensor with high adaptability, primarily applicable to:
  • Automatic Door Systems: Sliding doors, swing doors, glass induction doors (commercial buildings, shopping malls, office buildings)
  • Security & Monitoring: Perimeter security detection, indoor human motion induction (residential, factory, warehouse)
  • Industrial Automation: Conveyor belt motion detection, equipment start/stop induction (light industry production lines)
  • Intelligent Building: Smart lighting induction, air conditioning induction (public areas such as corridors and elevators)
Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 4 Doppler Detector RD24-4S | Stable Signal Output | Wide Detection Range | Durable 5
Core Technologies
Microwave Doppler Radar Sensor 24.125GHz Radar Sensor Automatic Door Motion Detector Wide Field Detection Sensor IP54 Motion Sensor